How to Install
Professional installation guide for Evention Films architectural films
Installation Video Tutorial
Coming Soon
Measuring Tape
Utility Knife
Roller
Heat Gun
Squeegee
Straight Edge
Ensure room temperature is between 18-25°C
Surface must be completely level and dry
Read all product instructions before starting
Wear appropriate safety equipment
Work in sections for large areas
Keep tools clean throughout installation
Take your time - rushing leads to mistakes
Consider hiring a professional for large projects
Step-by-Step Process
Surface Preparation
Clean the surface thoroughly, removing all dust, debris, and grease. Ensure the surface is completely dry and smooth.
Tip: Use a degreaser for best results, especially on kitchen floors.
Measure and Cut
Measure the area carefully and cut the film with 5-10cm extra on each side. Always cut on a clean, flat surface.
Tip: Let the film acclimate to room temperature for 24 hours before installation.
Apply Adhesive
Apply the adhesive evenly according to manufacturer instructions. Work in sections for large areas.
Tip: Use a notched trowel for consistent adhesive thickness.
Position the Film
Carefully position the film, starting from one edge. Avoid stretching the material during application.
Tip: Have a helper for larger pieces to prevent creases and bubbles.
Remove Air Bubbles
Use a squeegee or roller to push out air bubbles from the center outward. Apply firm, consistent pressure.
Tip: Work slowly and methodically to avoid trapping air.
Heat and Seal
Use a heat gun on low setting to activate the adhesive and seal edges. Be careful not to overheat.
Tip: Maintain a distance of 15-20cm from the surface while heating.
Trim Excess
Carefully trim excess film along edges using a sharp utility knife and straight edge.
Tip: Change blade frequently for clean cuts.
Final Roll
Roll the entire surface one final time to ensure complete adhesion. Pay special attention to seams and edges.
Tip: Use a 50kg roller for best results on floor applications.
Download Complete Installation Guide
Get the full PDF guide with detailed instructions and diagrams
Need Professional Installation?
Contact us to find certified installers in your area
Watch Video Tutorial
See the complete installation process in action